200 Watt AC To DC Switchers Enhanced EMI Performance AM200EC

Power Factor Correction
Fully Compliant with MIL-STD-461, CE101, CE102
Meets MIL-S-901 (High Impact Shock)
Meets MIL-STD-810
FCC 20780 class A EMI compliance
Sealed to meet IP67
Condensing environment option available
AC INPUT:
95 to 260 VAC, 47-880Hz, single phase.
Power factor corrected. Meets MIL-STD-1399, Section 300, type 1 requirements
EFFICIENCY:
80% minimum
LINE REGULATION:
±1% of nominal over the full range of line input voltage.
LOAD REGULATION:
±1% for change from no load to full load.
RIPPLE AND NOISE:
Peak-to-peak combined ripple and noise does not exceed 2% of nominal output measured with a 20MHz bandwidth.
OPERATING TEMPERATURE RANGE:
-50°C to +85°C Baseplate, Operating temperature: -40°C to +70°C baseplate with no power derating.
ISOLATION:
Input to Output 1500 VDC
Input to Case 1500 VDC
Output to Case 500 VDC
CIRCUIT PROTECTION:
Each unit is completely protected against a short circuit of any duration. The current is nominally set at 120% of full load. The output voltage automatically restores to normal when the short is removed.
WEIGHT:
2 lbs typical.
ENVIRONMENTAL CONDITIONS:
Shock test: Unit meets MIL-S-901 requirements (light weight)
Vibration test: Unit meets MIL-STD-167 , type 1 requirements
Humidity: Power supply operates without any evidence of degraded performance in non-condensing relative humidity up to 95% (select “C” option for 100% condensing environment).